How to Put Pictures on a Poster Board So That I May Reuse the Photos Again

Download Article

Download Article

Framing a affiche helps protect information technology from damage or deterioration over time. It tin can also add a more formal touch on to the decorative particular than just taping or pinning information technology to a wall would. By following a few simple steps yous will soon have a perfectly framed poster hanging on your wall!

1. 1

   Decide whether y'all will use a mat. Information technology is not always necessary to use a mat simply it can emphasis sure colors in your poster and frame it nicely.

   • You may not want a mat when framing a vintage poster or a poster of a archetype work of fine art simply that is completely your choice.

2. 2

   Choose your mat if using one. You will want a color that tin go with everything, including your room, the frame and the moving-picture show. It is usual to put a white or light colored map on top of an accent color. The accent color would be a color that matches the general tone of the affiche.^[1]

   • There can be multiple general tones of the poster so you tin choose whatever looks best to you and fits the remainder of your room. It is also your choice whether you lot use two mats or simply i.
   • Black and white pictures will do best with cool whites or grays, or even blackness.
   • You do not want to upstage the poster if using a mat. Choose colors that work well with a width of at least 1.5 inches (3.eight cm). Smaller widths can easily be used for posters considering they are and then large to begin with. Every bit always though information technology is your personal selection.
   • Y'all besides practice not want the top mat to be lighter than the lightest color in the moving picture or darker than the darkest colour in the picture.

   Advertizement

3. 3

   Decide where you will put the poster if possible. Knowing where you will put the poster will assistance you decide on the particular frame you lot should purchase because yous volition know the full general color scheme and theme of the location.

   • If you do not know where information technology will exist placed or it is a gift and then that is not a problem. There are enough of generic frames that will look skilful in a variety of locations.

4. 4

   Measure your poster'southward length, width and thickness with a measuring record or a ruler. You volition need the length and width to make up one's mind the size of the frame you lot must purchase. The thickness is important because many frames will only adapt very thin posters and you should be aware of the required depth before ownership.^[ii]

   • If you are using a mat be certain to include the dimensions (width, length and thickness) of the mat when measuring.

5. 5

   Choose a frame that is bigger than your affiche'south dimensions if you lot are using a mat. The extra infinite in the frame can allow for the decorative or protective background mat and prevent the frame from damaging the poster'due south edges. The frame must accommodate both the poster and mat.^[3]

   • Measure the dimensions of the surface area where you lot will insert the frame rather than the exterior size of the poster. If you measure only the outside of the edges of the frame so you will have a hard time fitting the poster into the space.

6. 6

   Choose a frame with the right way. Choose a frame that has the appropriate style for the room in which it will be placed likewise as your personal preferences and the particular poster. Wood frames usually have a more elegant and classy look while metal frames prove a more modern or clinical look.

   • Some plastic frames have been finished to give the appearance of wood or metal. These plastic frames are frequently cheaper and lightweight, which can exist useful when framing posters.
   • Acrylic frames can also be useful in that they might be clear, which means they won't cover upwards any of the graphics.^[iv]

7. 7

   Consider a frame that is quite thin. Posters are usually quite big and so it is best to choose a frame that is thin to residue out the shapes. Thinner frames will likewise emphasize the poster, making it stand out more than.

   • If yous desire to create a more dramatic or bold look so choose a standard or wider frame.

8. 8

   Buy a frame with higher-quality plexiglass. Await for a poster frame that has college-quality plexiglass, such as Acrylite OP-3, that is 1/viii inch (0.31 cm) thick. Although regular drinking glass is e'er an option, it can interruption or trap wet within the frame, dissentious the affiche. Lower-quality plexiglass may non forbid the poster from yellowing over time.

   • College-quality plexiglass can also be fabricated and then that it is glare-gratis and is much lighter weight than glass can be, making it platonic for big frames such as for posters.
   • Plexiglass can besides exist UV-resistant, which is of import if you lot are hanging the poster in an surface area that receives a lot of sunlight.
   • Plexiglass is more than prone to scratches, even though there are scratch-resistant types.^[5]

9. 9

   Buy a frame from a austerity shop to reduce costs. Big frames that fit posters can often exist quite expensive so consider searching your local thrift stores for options. You lot may find frames that take pictures in them that you lot can remove to repurpose for your poster.

   • Even if the frame is non the right color, if it is forest then yous tin repaint it later to a color of your choice.

10. x

    Buy acid-free poster backing for your frame. It is non ever necessary to use poster backing, but y'all may choose to use it for a more than professional look. It is important that the poster backing is acid-free, to avoid quickly fading and dissentious the affiche. Some frames come up with the bankroll already within the frame.

    Advertising

1. 1

   Make your own frame to relieve money and create a custom size. Making your own frame is a good option for those looking for budget options, and/or have a affiche with an awkward size for framing. Making your own frame allows yous to customize options without paying the expensive costs of a professional person framer.

   • This frame might not be particularly strong then information technology might not work with a drinking glass piece in front.

2. 2

   Determine whether you will employ a mat. It is not e'er necessary to utilise a mat simply information technology can accent certain colors in your poster and frame information technology nicely.

   • You may not desire a mat when framing a vintage affiche or a poster of a archetype work of art but that is completely your option.

3. 3

   Choose your mat if using one. Yous will want a color that tin can go with everything, including your room, the frame and the motion picture. It is usual to put a white or lite colored map on superlative of an emphasis colour. The accent colour would be a colour that matches the general tone of the poster.

   • At that place can be multiple general tones of the poster and so y'all can choose any looks best to you and fits the rest of your room. It is also your option whether y'all use two mats or only one.
   • Black and white pictures will practice best with cool whites or grays, or even black.
   • You do not want to upstage the poster if using a mat. Choose colors that work well with a width of at least 1.five inches (3.8 cm). Smaller widths can easily exist used for posters because they are so large to brainstorm with. As always though it is your personal selection.
   • You also practice not want the top mat to exist lighter than the lightest color in the film or darker than the darkest color in the picture.

4. four

   Measure your poster's length, width and thickness with a measuring tape or a ruler. You will need the length and width to determine the materials you must purchase. If y'all are using a mat be sure to include the dimensions (width, length and thickness) of the mat when measuring.

5. five

   Purchase wood trimming. Buy wood trimming (moulding) from the hardware store. You volition desire a type of trimming that looks like a frame edge and hopefully has a ledge on one side, such as might hold a poster as a picture frame would.^[6]

   • You volition need enough to cover the length of all four sides of your affiche, plus extra if yous are using a mat (the width of your mat times four) and some more than (8-12 inches or 20-30 cm, depending on width of wall trimming) for the corners.
   • You might only find a patently moulding that has a ledge in it, but do not worry, y'all can always customize colors later to add together some ornament.

6. 6

   Miter the wall trimming to the right lengths. Mitering involves cut the edges of the wall trimming at 45 caste angles and so that they fit together to form a xc degree angle in the corner. Measure carefully and then that you lot make the edges the correct length.^[vii]

   • You volition want each outer edge to exist as long as that side of the poster plus the width of the other side of the frame times 2.
   • Brand certain your opposing pieces on the superlative and bottom or left and right are equal lengths then that the frame can exist squared properly.
   • Brand allowance in the lengths for the mat width as well as the poster size.

7. 7

   Paint the pieces your color of pick. If you desire to paint the frame and so be sure to do information technology before putting together your frame considering it can exist hard to paint once assembled. Choose a color that fits your hanging location, the poster and your personal preferences and goals.

8. 8

   Glue the pieces together end to end to create the frame. Use woods glue to attach the pieces to each other end to end. Concur them together while drying past using clamps. Allow the frame to dry with the front side facing down, which will aid later on.^[8]

   • There may be gaps in the woods and it may not hold together completely on its own but that is ok. The corners will be attached more than securely subsequently.

9. ix

   Attach the pieces together using metal corner attachments and wood screws. Use metal corner pieces to adhere the corner pieces. These will exist 50-shaped and should be the correct size, not too big or as well small, to fit on your corners.

   • Make sure the forest screws you use are not besides long so that the poke out the front side of your frame. Employ short screws.
   • Drill the screws in carefully so that the forest does not crack or become damaged.
   • You may wish to employ a band clamp to hold the corners together merely it is non necessary. A band clamp is a long piece of nylon with a clamp on one side to wrap around pieces and agree them together.

10. ten

    Use wood putty to fill in cracks. You may have cracks showing on the front side of your frame. To fix this you can employ forest putty to smooth in the gaps with a putty pocketknife to remove backlog putty. And so you will accept to repaint the corners for a nice fifty-fifty look.

11. xi

    Attach niggling clips for holding the movie into the frame. You can find trivial clips as part of a framing kit or at a hardware store. You can also not purchase clips and rather staple your poster into place if the frame is wide enough. Tape can too work if you don't mind the look.

12. 12

    Obtain a piece of glass or plexiglass if you lot cull to use it. It is non always necessary to use glass or plexiglass over your poster but can look more professional and finished. This frame is not incredibly strong so drinking glass might be a scrap heavy, just plexiglass will piece of work well. Have a piece of plexiglass cutting to the correct size at your local hardware or framing shop.

    • Alternatively you lot might find a piece as office of another movie frame at a thrift shop or hobby shop on sale.
    • Higher quality plexiglass such as Acrylite OP-3 that is i/8 inch (0.31 cm) thick will work well. Higher-quality plexiglass tin also be made so that it is glare-free and is much lighter weight than glass can be, making information technology platonic for big frames such as for posters, although it is more decumbent to scratches than glass.
    • Plexiglass can also exist UV-resistant, which is important if yous are hanging the affiche in an area that receives a lot of sunlight.

    Advertisement

1. 1

   Attach your poster to an adhesive foam lath. This is particularly necessary if the affiche has been rolled up for a long time and volition not hang straight. Pare dorsum a few inches of the adhesive foam board'southward protective motion-picture show and line up the print with the edge of the board. Unroll the poster onto the board slowly, unrolling a few inches at a time and applying to the poster. Smooth out whatever air bubbling using a credit card or the spine of a hardcover volume.^[9]

   • Apply a pin to poke a hole in whatever big bubbles from behind (through the cream, not the poster). Once you allow the air out, smooth it down completely.
   • Trim excess foam from the board using a pocketknife and metal ruler to brand well-baked edges.
   • You can also pay for someone to apply a cream lath for about $20 (depending on the expanse) if you lot would similar.
   • Remember that a cream board volition increase the thickness of your poster and tin can affect the frame that you choose.^[10]

2. ii

   Undo the hinges on the back of the affiche frame if they are there. Remove the backboard, or whatsoever is currently inside the frame, if there is one. The glass or plexiglass volition stay within the frame, if in that location is such a piece.

3. three

   Fit your mat on top of or behind your poster. If you lot are using i, your mat tin be placed either on top of or behind your poster. Putting the mat backside your poster is easiest, because then you will not have to cutting the mat. If yous choose to put the mat on peak of the poster, and then you may have to cut out the inner shape so that the poster can be seen inside.

   • Information technology tin can exist difficult to cutting the edges of a mat accurately and without damaging the mat so you can usually take this completed at a framing store for just a few dollars.

4. 4

   Clean the plexiglass or glass and let it dry. Information technology is very of import that your glass or plexiglass be clean on the inside where information technology touches the affiche. Moisture will damage the poster so it is besides very of import for the piece to be dry.

   • You practice not want whatever fingerprints or other oils on the side touching the affiche.
   • Plexiglass is decumbent to scratches so be sure to clean information technology only with a microfiber fabric rather than newspaper products.

5. 5

   Slide the plexiglass or drinking glass piece into place. If you lot are using one, and then you must slide the glass or plexiglass into place starting time. The most important side is the one that will exist touching the poster then make sure not to bear on this side when putting into place.

   • Yous can always clean the other side once again, so don't worry nigh touching it all over when putting into place.
   • Hold the piece as if it is a pizza when placing into the frame.

6. 6

   Slide your poster into the frame to see how it looks. Adjust the poster's (and mat's, if you lot have one) placement within the frame if necessary. Make sure the edges are even and straight and so that it does not look crooked or uneven.

7. vii

   Clip or staple the poster into place. Attach the poster into place so that it does not shift while hanging. You lot can purchase small clips for this purpose from the hardware store or simply staple the poster into place from backside. If you are stapling, make sure yous do it at the border and at an angle so that it is secure and does not testify from the front.

8. 8

   Insert poster backing if yous will employ it. Affiche bankroll is not usually necessary if you accept attached your poster to a foam board. However, if you have not done and then or wish the picture to look more professional person, then you should add poster bankroll to encompass the back of the poster.

   • Make sure your poster bankroll is acid-free if you are using it or else it can damage the poster.

9. 9

   Adhere the hanging mechanism. You can either use small d-rings (which adhere by screwing in) and a wire, or the zig-zag motion picture hanger pieces (which will be screwed on with small screws). Both of these are available from your local hardware store. Make sure to adhere these to the frame, not the poster, so that they are secure and strong plenty to hold your poster upward.

   • Y'all may demand more than than 1 motion-picture show hanger if your frame is item big and/or heavy. Make sure there are plenty to agree your moving-picture show upwardly securely.

10. 10

    Hang your poster. Use screws or nails to insert into the wall so that you can you're your picture on them. If you are using more one hanging slice, then you must make sure the pieces are level on the wall so that the poster will not be hung crookedly. Adjust your affiche until it looks straight and even.

    Advertisement

Add New Question

• Question

  How does one know how thick of a frame to club? I desire to frame a very large envelope with a Japanese fan for display purposes.

  

  There is no real correct answer to this. Information technology is purely a matter of personal choice. Having said that, you lot will need to measure the depth of the mounted fan for clearance. Perhaps you could take the fan to a picture framer and endeavour out a few frame depths and mounts to see which you lot feel is best. You don't have to buy, and they'll probable exist happy to give you advice.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

• To find a frame for less money, consider ownership an art impress that comes framed and matches or exceeds your poster's dimensions by 1 or 2 inches (2.5 or 5 cm).

• Affiche frames of all kinds and different materials are available for purchase in stores or online. Some frames are attached to a stand up or framed freely on a wall. Frames can be made of wood, metal or other material.

• If having a professional frame your poster at a store, visit more than than one shop to become a pricing guess and an idea for what the finished production would look like.

• A poster will unremarkably stay secure on its own when it is within the frame. If yours does not, consider using tape or some other adhesive to stick the poster to its poster backing.

• Once your posters are framed you'll want to take some fourth dimension to find the best mode to decorate with them.

• If the poster is replaceable, you lot might consider having it dry mounted. Although there is a take chances of harm, this volition get it flat.

Thanks for submitting a tip for review!

Advertisement

• Do not tape or otherwise attach a rare or valuable poster to backing of any sort.

• Exercise non use ammonia-based products to make clean the plexiglass. Otherwise, a cloudy motion picture will develop on the surface of the glass.

Advertisement

Things You'll Demand

• Measuring tape or ruler
• Affiche frame
• Plexiglass
• Acrid-free poster backing
• Background mat
• Poster
• Record or other adhesive
• Not-ammonia-based cleaning product

About This Article

Article Summary X

To frame a affiche, start by measuring the length, width, and thickness of your poster to determine the size of the frame you'll need to purchase. Once you've called your frame, adhere your poster to an agglutinative foam lath so that information technology's easier to frame. And so, remove the backboard or undo the hinges at the back of the frame and insert your affiche. Finally, clip or staple the poster into place to keep it from shifting while hanging. For more advice, including how to save money and create a custom size past making your own frame, keep reading.

Did this summary help you?

Thanks to all authors for creating a page that has been read 233,897 times.

Did this article assistance you?

lockesime1947.blogspot.com

Source: https://www.wikihow.com/Frame-a-Poster

Share this post